Showing posts with label Arts and Crafts. Show all posts
Showing posts with label Arts and Crafts. Show all posts

Friday, April 11, 2008

Step Up Transformers

Unlike step down transformers which will lower high voltage incoming current to a more energy efficient and safer low voltage like landscape lighting transformers, step up transformers act in the opposite manner. Their task is to take low voltage in their input, and convert it to a higher voltage in their output. The currents that flow through the transformer will act in an inverse way. The low current, high voltage is coming into the step up transformer and a high current, low voltage is the output. These have to be proportional to each other since multiplied together, you can find the power flowing through. Transformers do not create power, though, and they must conserve whatever is flowing through them to be efficient. This is why there is the inverse relation between the current and voltage of the input and output of the transformer.

One of the common uses of step up transformers is their use by travelers to the United States from Asian or Europe where the electrical outlets have an output of 220V. In America the typical outlet has a voltage of 120V. This means that these wayfayers will have to use a transformer to convert the amount of voltage from the 120V outlet to power their electrical devices which require 220V. If you are an American traveler going abroad, you will need a step down transformer if you want to operate American appliances.

Step up transformers are also used in applications where the device connected requires more than the typical 120V outlet. This could be anything such as outdoor lighting. In order to decide which transformer is best for your project, keep in mind that step up transformer cannot create more power. This means that you should add up the power – measured either in volt-amperes (VA) or Watts – of all the devices you intend to connect. You should also plan for some extra space in their to accommodate future project additions. You do not want to encounter a blown transformer in the future because you add a light or two. Keep in mind that over long distances, the voltage of each successive device will be lower, and you could easily encounter problems by overloading the transformer. When you are wiring your step up transformer the high voltage outgoing wires will connect to the the H1 and H2 wires of the transformer. The low voltage incoming will be tied to the X1 and X2 wires. It will be simple if you just remember that the high voltage starts with an H and it will connect to the H wires in the transformer. The Xs are for the low voltage input.

If you are unclear as to whether or not you need a transformer or what kind, then you need to ask an expert. Consulting with a professional electrical contractor will save you the costs of accidents and damage from improper installation of your project. Should you feel that you can install it yourself, but just need some guidance, there are many places to find expert tips and advice to help answer any of your step up transformer questions.

How To Draw 3D Cartoons

Drawing cartoons is not the most difficult thing in the world but it isn't very easy either. You need time, imagination and sense of proportions to produce vivid characters and make your drawings look three-dimensional.

Colors and shades have a decisive role in the business but the lines and curves you use for the contour constitute the basic element. The art of adding shadows can be learned by studying objects in different places of your room if you can count on natural light. Otherwise, a lamp may be used to detect the difference that light makes in the appearance of an object. Grab a funny toy that you have in the house and a little lamp and start learning. Move the lamp around the toy and above it and make a visual note of what happens each time.

Now take a pencil and a piece of paper and try putting down your toy-character. Draw the contour and when you think it looks like your toy you may use a black color pencil to add firmness to the contour. Next step: color your character without thinking of shadows; they will come soon. As soon as you have filled the contour you will have to find the appropriate color pencil to make shadows with. Use a darker shade of whatever color your character is. Don't use gray or black, they will make your drawing look artificial.

With animal cartoon characters, the expression of the eyes and the proper shading are the basic elements that make them 'live'. The only thing to keep in mind is the head, which must be bigger for a baby animal. Yet, when you want to create people, proportions are a lot more important than colors. When we watch a film we usually concentrate on the face of an adult human character, but the general appearance can be easily noticed by the way it moves. Looking at a photo of yours or at your 6-year-old brother playing about the room will not help. There is nothing funny in real-life proportions. What you should do is exaggerate more or less in order to make your cartoon character amusing. A kid character will have a body about the same height as the head, while an adult character will look perfect with the body twice the height of the head.

Once you have created a set of animal and human cartoon characters (preferably on a graphic tablet with a stylus) and saved them in your computer, you may start preparing for a more difficult activity: creating 3D animations. There are several programs you can use to learn that. TrueSpace for instance is free and if you read the tutorial thoroughly and spend a couple of months of your life learning and testing the wide variety of options that the program includes, you may turn into an artist before you can notice. Nothing is easy when you try it for the first time, but with a little patience and a lot of passion you can make it. Believe me, 3D animation is a lot of fun, otherwise there wouldn't be so many adults doing it for pleasure. It is challenging and very rewarding. Try it yourself!

Emergence Of Vietnamese Contemporary Art

A relatively modern event in the history of world art is the evolution of the contemporary art in Vietnam. Previously for almost half of a century, Vietnamese art was intended to serve a collective goal. And the goal was revolution. Nudes, still-life and other such forms of arts were considered a betrayal to the socialist ideology. It however, took a more definite shape under the influence of Doi Moi, Vietnam’s Perestroika, who took a more liberal approach and gave enough freedom to the Vietnam artists to come out of their shell and turn to their individual visions. And this resulted in the Vietnamese contemporary arts to reach its peak towards the end of the eighties with plenty of artists participating in several exhibitions in various parts of the nation. The recent economic development in Vietnam further helped the artists to reach a feat which was previously impossible for them. Now it was possible for the Vietnamese artists to achieve international success.

During the feudal times, unlike their other counterparts, the Vietnamese arts were more about sculptures and designs of temples and pagodas. At the end of the nineteenth century, the French introduced the technique of oil-painting to Vietnam and in 1925 they established the 'Ecole des Beaux-Art l'Indochine' in Hanoi. This was the beginning of the development of a professional class of painters in Vietnam. However, the education to these artists was given mostly following the model of the French arts. It was more about nature and landscapes in a realistic and impressionistic style. But this once again changed due to the war against France. The war led to the separation of the nation into the North and South Vietnam, and then there was a war between the North and South. This divided the style and techniques of Vietnam arts. The artists from the North (under influence of the Soviet Union and the People's Republic of China) turned in the direction of the social-realistic stream, while the southern artists embraced western trends, influenced by the presence of the Americans. However, neither the influence of the Soviet Union nor of the western countries was decisive in the development of Vietnamese Modern Art; it was rather their concern to survive the war that influenced the development. It was definitely not the time for experimentation.

In recent times, the contemporary Vietnamese artist is free to represent his or her inner self in his or her work. In spite of this new liberal climate, Vietnamese art is not 'innovating' in a European sense. Vietnamese painting does not demand philosophical questions about the definition of painting itself. This springs from the undeniable link between Vietnamese art and the political and social history of its country.

However, the recent years have been exceptionally well for the Vietnamese contemporary artists. Many of them received invitations from different parts of the world to exhibit their arts and have been recognized. The change in the Vietnamese contemporary art can be observed in the arts itself. It can surely be said that Vietnamese contemporary art has moved forward towards a progressive realism and has thus allowed its patrons to identify the work of art with their lives.

Better Photography - Using Your Built-in Flash

The light from even a small flash is as powerful as the sun but, given that it's only source of energy is a small battery, it can only produce this amount of light for an extremely small period of time - less than 1/1000th of a second. The actual length of time the flash fires for is very carefully controlled by your camera. During a flash exposure, your camera constantly monitors the amount of light reaching the image sensor and shuts off the flash as soon as the picture is exposed correctly.

It has to do this because the light from a small flash falls off dramatically the further away you are. In fact, it falls off with the square of the distance. That means if you moved your subject twice as far away, you would need four times as much light, 3 times further away requires 9 times the amount of light.

But you don't need to know that because your camera will do all that for you automatically. If you did move your subject 3 times further away the flash duration would simply be 9 times longer. This would still be an extremely short time and you probably wouldn't notice the difference. What you might notice is that the flash would take longer to recharge because it had used up so much power.

The very first flashguns were entirely manual and photographers had to do long calculations to determine the correct exposure when using flash. Studio flash units still work this way but most photographers now use flash meters to avoid having to do all this calculating.

So your flashgun will automatically compensate for the distance of your subject and give you a perfectly exposed picture every time - what could possibly go wrong?

Out of range

Although your flash will compensate for the subject's distance, it has its limits. It only has a certain amount of power and this translates into a maximum distance for your subject. If you try to take a flash picture from any further away, it will just be too dark or underexposed. Your camera's manual should tell you what the maximum subject distance is for flash photography is. In small cameras it is typically 12-15 feet.

It is often expressed as a range of distances rather than a single absolute figure because the conditions under which you are taking the photograph will have an effect on this maximum distance. For example, When you take a picture indoors the light from the flash not only goes directly to the subject but also lights up the whole room. The light that hits the walls and ceiling then bounces off them and adds to the light landing on your subject.

Compare that situation with taking a flash picture outdoors at night. The light that doesn't reach your subject directly has nothing to bounce off, so overall, less light will land on your subject. Whilst your camera's flash might be able to compensate perfectly well for this, it will reduce the maximum distance for flash photography compared with taking pictures indoors.

Of course, indoors can mean a tiny room or an enormous one. So, if you are taking your photograph in a baronial banqueting hall with very dark walls and a high ceiling, you could be approaching the same situation as you have outdoors and the maximum distance for flash would be reduced.

What this means in practical terms is that if you have just taken a flash picture and it looks too dark, just get closer and try again. That will usually solve the problem.

Don't get too close

There is also a minimum distance for which you can successfully use flash. As your subject gets closer and closer, the flash duration gets shorter and shorter. Eventually, you will reach the limit of how quick the flash can be. In practical terms, this translates into a minimum distance for flash photography with your camera.

I'm sure all of you will have seen pictures of people taken with flash where their faces were bleached out and they look like ghosts. That's what happens if you get too close with a flash gun. Again, your camera's manual should give you the minimum flash distance for your particular camera.

If you can't find the information about maximum and minimum flash distances you could always do a few test shots and measure it for yourself. As a general guideline, if your subject is between 6 and 12 feet away, you should be all right.

In the real world

Of course, in reality there will be a lot more in your photograph than just the subject. There will be something behind your subject in the background and there may well be something else in the foreground. This is where flash photography gets complicated. The fact is, that even if your camera works out the correct exposure for your subject's distance, it's only correct for that distance. Anything closer or further away will actually get the wrong exposure.

It's relative distance that matters here. For instance, if you are taking a photograph of someone who is standing quite close and holding their hands out towards the camera, their hands will, relatively speaking, be much nearer to the camera. Two things can happen here. Either the hands or what they are holding will be far too bright (overexposed) or the camera will set the exposure correctly for the hands and the subject's face will be too dark.

The cure for this is to move further away from your subject. Whilst their hands and face will obviously be the same physical distance apart, this will be relatively less than the distance to the camera and that's what affects the exposure.

Exactly the same thing happens if your shot contains more than one person or other subject. If they are far apart in terms of distance from the camera then the nearest one will be very much brighter than the one farthest away.

You may have taken a flash picture of someone in a very large room and been surprised to find that the background extremely dark, much darker than it looked in real life. This is again the effect of relative distance. If the background is a long way behind your subject then it will not receive much light from the flash.

The opposite is also true. If you take a flash photograph of someone standing against a wall then the wall will get the same amount of light as the subject. This can be distracting, especially if the wall has interesting features. It can look as though your subject is somehow "stuck" onto the wall. It is usually better if the background is a little darker than the subject of the photograph.

What's different about flash photography?

Many people notice that the picture they take with flash looks completely different from what they see when they look through the camera. This is perfectly normal, and here's why.

What we actually see is light. When we look at anything what we see is the light that bounced off it towards our eyes. The direction and quality of the light defines the way everything looks to us. In this respect the camera is no different. If we didn't use flash then the photograph would look much more like what we actually see. Of course, we can see perfectly well in light that is far too dim for a camera, and that's why we need flash.

The light from a flash, being as bright as the sun, will totally overwhelm any other light sources in a room. The scene changes from being lit by, for example, a window off to one side and a few indoor lamps to one being lit by a very bright light placed very near to the camera lens. We never see the scene this way, only the camera does. That's why the flash picture can look completely different. Just imagine switching on an extremely bright spotlight in a small room and how that would change the way the room looks.

That is also why studio flash units have a "modelling" light, so the photographer can see the effect of using flash before they take the photograph. Built in flash guns do not have this option.

Practical tips

The ideal situation for taking photographs using your built in flash is as follows:

1. The subject of your photograph should be between 6 and 12 feet (2-4 metres) away from the camera.

2. The background should be the same distance behind your subject.

3. If there is more than one subject, make sure they are all in a line at the same distance from the camera.

4. Check that there is nothing in the foreground of your shot that is significantly closer to the camera than your subject.

I hope the above has given you some insight into the effect of using the built in flash on your camera. I certainly hope that it hasn't put you off using flash because, with a little planning, you can produce excellent flash pictures every time.

5 Simple Tips For Better People Pictures

I've been a professional photographer for long enough now to start getting invited to judge some local photography contests. In doing so I have been struck by the fact that so many of the pictures, especially those of people, could have been dramatically improved by the application of just a few simple ideas.

I'm not talking professional portraiture here. Few, if any, of the entrants to these contests would even consider themselves to be serious photographers. In this digital age, it has become even more obvious that the difference between a good photograph and an ordinary one has little to do with the camera and everything to do with what the photographer thinks about before they take the picture.

With that in mind, here are a few things to think about the next time you take a picture of someone. Who knows, you might even want to enter it in your own local photography contest.

Tip 1. Turn the camera around

It is the easiest thing in the world to just pick your camera up and hold it horizontally to take the picture. Cameras are designed to be naturally held this way but it produces an image in what is called a landscape format, where the picture is wider than it is tall. As the name suggests, this is very good for landscapes.

Turning the camera on its side will produce an image in portrait format (taller than it is wide) that is much better suited to pictures of people. It's obvious when you think about it, people are taller than they are wide so they will always fit the frame better if the camera is held this way round.

Using the camera this way might feel slightly awkward at first but, with a little practice, you'll soon get used to it. The only times a landscape format works best is with a group of people or if you go close enough for a "head and shoulders" shot or you deliberately want to include something else in the background of the shot.

Tip 2. Get closer

A general rule for a good photograph is that the subject "fills the frame" and, once you have turned your camera on its side, this becomes much easier to do. It's almost essential if you want to include their whole body but you would only need to do that if what they were wearing was important to your picture.

Normally it's best to go in until there is just a little space either side of them and a little more space above their heads. This will usually mean you are cutting them off around the waist. For various technical reasons, it is better if you don't get physically closer than about 6 feet (2 metres), especially if you are using flash.

Tip 3. Find a plain background

Another thing that makes a good photograph is if there is nothing to distract the eye from the main subject. Filling the frame will help a lot with this but every subject has to have something behind them so try to keep this as plain as possible. The sky (especially on a cloudy day) might be the most obvious choice but it's not usually the best.

This is because it is much brighter than it looks to the human eye and, unless you know how to compensate your exposure for that, may give you an underexposed picture. Even when you do compensate, there is a great danger of your subject's hair just disappearing into the washed out sky. This hardly ever looks flattering.

If you are near a building, consider having your subject stand close enough to it so that there is just a plain wall in the background. If there is nothing obvious in the vicinity, try standing a bit further away and zooming in. In most cases this will throw the background out of focus, making it less distracting and making your subject stand out much more clearly.

Be careful if you have a zoom larger than about 4X because it may be difficult to avoid camera shake if you zoom right in with one of these. Ideally, you would use a tripod in these situations but that's getting a bit beyond the realms of simple photography.

Tip 4. Watch the sun

It's great when the sun comes out. All the colours are brighter and people find it much easier to smile. However, bright sunlight produces hard dark shadows which can have a very unflattering effect on someone's face if they are at the wrong angle. It is much easier to take pictures of people on a cloudy day because, no matter which direction they face, the lighting won't change too much.

Of course, we can't control the weather so probably the best thing to do on a sunny day is to find a shady spot to take your photograph. In order for this to work best, the background, the subject and the camera should all be shaded from direct sunlight.

When there is no shade to be found then you should consider the angle of the sun relative to their face. There are two positions that minimise the effect of shadows cast by the sun. If your subject stands almost directly facing the sun then the shadows on their face will be at their smallest. Don't have them absolutely directly facing the sun or you might get your own shadow into the shot.

Another option is to have the sun behind them so their entire face is in shadow. Again, don't have the sun directly behind them or you could end up with some flare in your picture. You may have to adjust the exposure for this type of shot but it's the best set up if you can also use "fill in" flash on your camera.

Tip 5. Get on the eyeline

Having sorted out the background and the lighting, the next thing to consider is your subject and the position of your camera relative to them. Eyeline can mean different things depending on the context but here I'm just referring to your subjects eye level. This is ideally where your camera should be, at the same height as their eyes or very slightly below.

In professional portraiture, the height of the camera relative to the subject's eyes plays an extremely important part in determining how they will look in the final image. Even slight changes of this aspect can make a profound difference. The most "neutral" place to be is at the same level and, unless you are making a portrait as opposed to just taking a picture, this is the best place to be.

When dealing with a subject who is much taller than you then you should think of asking them to sit down so you can get on their eye level. If that's not possible, try standing further away and zooming in. This will reduce the angle at which you are pointing up and minimise the effect.

In most cases the problem arises when you are photographing someone sitting down or a child or even a pet. It is almost always going to be a better picture if it is taken from the eye level of your subject. You don't need to take my word for it, try it for yourself the next time you are in this situation.

Extra tip. Don't be square

If you follow all of the above, you should be able to take a decent photo of anyone but that is still some way away from making a portrait, which is an attempt to show your subject's character and personality as well as being a good picture of them. Once you have mastered all the tips, you might be inspired into taking this one stage further and stepping into the realms of portraiture.

For this you need to think about your subject's pose and probably the simplest way to start is to avoid having them squarely facing the camera. Ask your subject to face about 45 degrees away from the camera or have them stand still and you move round about 45 degrees. Then ask them to turn their head to face the camera for the shot. This usually looks much better than just being square on and, if nothing else, will have a slimming effect on most people, which is often appreciated.

Which direction they turn usually doesn't matter but a few people have a "good" side. The best thing to do is to try a shot from either side and decide what is best later on.

Summary

For better people pictures you should: turn the camera around for portrait format, fill the frame with your subject and always shoot from their eye level. Oh, and if it's a sunny day, get into the shade.